Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage)

RAH-66 "CO-COMANCHE" is a new helicopter being used for reconnaissance mission of arming and light assault for the land forces."CO-COMANCHE" was designed by TWF as a 4CH helicopter with co-axial, double rotor blades system, it is easy to fly with simple operation, which possesses the characteristics of high sensitivity and flexible turning of the real helicopter.

It was designed with divided canopy and fuselage connecting by a carbon fibre rod, which is practical and beautiful. There are three sliding wheels in the landing strut, which can slide automatically while taking off and landing. The ornamental tail rotor adopts duct rotor blade that can rotate automatically while flying the helicopter, which brings you into a real flight state and brings more fun for your flight. ESKY original softdog is included in the packing, installing the FMS software of the disc, and connecting the simulator port in the transmitter to the computer, you can enjoy your flight in the computer then!
(via Esky 4Ch RAH-66 Co-Comanche CoAxial Electric RC Helicopter RTF(Camouflage) @ Hobby-Estore.com $89.9)

Charger 110V(USA) EK1-0052 for Esky E004 Helicopter

Electric R/C Helicopters Parts & Accessories > Esky E004 Replacement Parts > Charger 110V(USA) EK1-0052
(via Charger 110V(USA) EK1-0052 for Esky E004 Helicopter @ Hobby-Estore.com $11.5)

Esky LAMA 4CH V3 Co-Axial Electric RC Helicopter RTF

Esky LAMA Version3 Co-Axial Helicopter flies stably and silently indoor and outdoor, just as walking in the air. It makes you and your family to have lots of fun with it together. With double-sharing-one-axis structure and with stable and silent flight, it is designed for beginners with no experience , It is easy to learn to fly. You can be familiar with its operation and enjoy the flying in a short-term. With power supply of Li-polymer battery, it can fly lighter and longer. Complete set, Ready To Fly. Only requires 8 AA Batteries for Transmitter.
(via Esky LAMA 4CH V3 Co-Axial Electric RC Helicopter RTF @ Hobby-Estore.com $69.9)

Esky Honey Bee FP Setup

Esky Honey Bee FP

Once you have your new Honeybee and have read the manual while the battery is charging, here are some things to check.

Servo pushrods - These should be adjusted so the servo arm is horizontal when the swashplate is level. You can adjust the length of these by unclipping the ball joint and screwing it up or down the metal rod.

Flybar - The flybar also needs to be balanced. This is achieved by loosening off the screws on the main motor and pushing it away from the main drive gear, creating a gap between the pinion and allowing the main gear to move freely. Remove the rotor head and blades. Hold the helicopter by the tail so the main shaft is horizontal and spin the flybar and mainshaft. When it's balanced it should stop in a different position when spun...the heavier paddle will find its way to 6 o'clock if the balance is out... gravity works.... There are 2 grub screws that secure the flybar into the paddle control frame and these may need to be loosened to slide the flybar to one side or the other to achieve balance.

Alternate quick method: remove the rotor head and run the motor. Add a little tape to one paddle and try it again. If the vibration is worse, move the tape to the other side. Try it again with another bit of tape. If you need lots of tape you should use the previous method.

Paddles - These need to be at 90 degrees when you look at them side on to the main axis of your heli (some of us find it easier to learn to hover with a little positive pitch on the paddles but they must be equal and you definitely want them level for forward flight).

Main rotor balance - This can be achieved in a number of ways; the easiest is to pop off the the whole rotorhead assembly and put it between two glasses, think see-saw...add tape to the lighter blade to achieve good balance.

Tail rotor balance - Again the glass trick works, add tape as required.

Centre of Gravity (CG) - Suspend your heli by its fly bar with the battery mounted in its holder, you may need to modify the airframe to allow the battery to be moved forward toward the nose of the heli to achieve good balance.

Tracking - Clamp the helicopter to a bench and run the motor at hover speed. View the rotor disk edge on - you should see both blades going around at the same height. If one is higher than the other you can make it make less lift by holding the root in one hand the the tip in the other and twisting the leading edge of the tip down for a few seconds. A little heat from a hair dryer may be required to make large adjustments. Identify which blade is which by a piece of coloured tape on one blade.

Mesh - To properly set the mesh between the pinion and main gears, loosen off the screws that hold the main motor to the airframe, take a strip of paper and fold it in half then insert it between the main gear and pinion. Push the motor back towards the main gear and move it back and forth a few times until the paper is compressed between the gears. Tighten the screws up and remove the paper... Et voila!

Proportional mix and gyro gain

Turn gain to below half way. (Note: Full clockwise is max gain.)

Plug in 4in1 and wait for solid green light. (Make sure helicopter does not move during this stage)

Fly heli and note the direction of yaw.

Land and unplug the 4in1. (Must unplug 4in1 for changes to take effect.)

Adjust the proportional pot.

If the nose was yawing right then decrease pot (counterclockwise).

If the nose was yawing left then increase pot (clockwise).

Repeat steps 2 to 5 till the yaw is gone.

Fly the heli and increase gain till you experience some tail wag. (No need to unplug 4in1 when adjusting gain.)

If you do experience tail wag then decrease gain a bit till the wag is gone.

Changes in the gain may reintroduce some yaw. If so, repeat steps 2 to 5 again with the new gain setting.

Note: Make sure not to move the helicopter while the 4in1 is initializing. Always wait for the solid green light before moving it, otherwise the gyro may not calibrate correctly.

E-Sky's Belt-CP

Electric RC Helicopters rates as the fastest growing sector of the radio control hobby world in recent years, and Align's T-REX helicopter line dominates the high-end portion of this niche market. Now, one of Align's main rival, E-Sky, launches a model whose parts are fully compatible with those of the T-REX, the Belt-CP. Undoubtedly, this helicopter aims to steal some of the market share. Hobby Thailand recently has a look at this model to see how well it performs and weather it has the potential to steal the crown from the current king of high-end electric rotor crafts.



First and most notable point of this model of this model is the fact that, as stated earlier, all the parts are interchangeable with the T-REX. However, the price tag of the Belt-CP comes much less heavy. These two facts combine to make the Belt-CP a desirable low-priced alternative to Align's models. Moreover, finding replacement parts for the Belt-CP will be easy as T-REX's spare parts are already flooding the market. Nevertheless, E-Sky's own parts, although a little bit harder to find, are also of fine quality and (once again) cheaper.



The included components of the Belt-CP are an impressive set right out of the box. The kit comes complete with the helicopter body, a brushless 3,500 kv Out Runner motor plus a heat sink, four servos, and a EK2-0704 Gyro. The only thing that's missing is a radio controller and a receiver. However, many hobby shops will add in a cheap controller and receiver to make a complete set at an irresistible price. In fact, my favorite hobby shop sells the Belt-CP together with a radio and a receiver for only $200.



The Belt-CP is a fully 3D-capaple 6 channels helicopter that flies smoothly right out of the box. Its flight capabilities rival that of much more expensive models in its class. Nevertheless, for pilot who require even more precision and responsively, a few upgrade will do the trick. Upgrading the Belt-CP will be easy since compatible parts are all over the market. Suggested upgrades include carbon fiber blades and a better Gyro - the Futaba 240, which fits perfectly to the body - for example. The included motor is already powerful. Another noteworthy aspect of this model is that ball-bearings are fully integrated into the kit.



All in all, the Belt-CP is a capable helicopter with a great price for quality ratio. This model provides pilots with a low-price alternative to Align's T-REX without having to sacrifice quality. With its part fully compatible with the T-REX, this helicopter is quite an interesting model to try indeed.

The Esky RC Helicopter

The Lama V4 RC helicopter comes full built and ready to fly micro helicopter. Its coaxial head design which is counter-rotating is very stable than anyone who has not flown one of these before will become very experienced in a short period of time. The V4 Lama has other features that many other remote controlled helicopters do not have. The strong power of its Esky 8g servo's, and 4-1 controller are great to look at, very low weight and are great on the eyes. The counter rotating blades assist in cancelling out the rotating torque meaning you can hover with ease that other helicopters find hard to achieve. The rudder turning is also assisted and leaves no instability. A great rc helicopter to fly and a fantastic machine will keep you engrossed for a long time. This has got to be one of the best helicopters on the market with its stable flying, performance and flying grace.

All you need for flying this machine comes in the box which consists of the helicopter fully built and ready to do, a 4 channel radio controller, long lasting lithium battery, 12v car battery adapter and AA batteries for the radio controller. The box is even good to look at so great for a gift for a son or dad.

Specs:
(1)Main rotor diameter:340mm
(2)Weight:230g
(3)Length:408mm,width:85mm,height:180mm
(4)Power system:180 motor*2
(5) Build: RTF
(6)Transmitter:Standard 4 CH
(7)Mix controller:4 in 1 controller (W/gyro,mixer,ESC,receiver)
(8)Servo:8g,1.3kg.CM,0.12s/60
(9)Battery:7.4V 800mAh Li-polymer battery

Features:
1.Coaxial, counter-rotating blade rotor design provides incredible stability and positive control.
2.Full RC system set Included, ready to fly out of the box.
3.Pre-installed ESKY 8g servos and 4-in-1 control unit
4.No installation or assembly required.
5.Dual 180 motors makes the Lama V4 powerful and efficient.
6.800mAh 2-cell Li-Po battery pack is low weight, high power and provides flight durations of 10-15 minutes per charge.

There are many more types of RC Helicopter with the most popular type of model being rc cars which have several varieties such as petrol rc cars, electric and nitro fueled. Aside from them, you also have planes, tanks and robots so a hobby area which spans a wide area. We hope this article has been useful and you check out the Esky Helicopter.
(via Esky, RC Helicopter @ Hobby-Estore.com $83.9)

Esky LAMA 4CH V3 Co-Axial Electric RC Helicopter RTF

Esky LAMA Version3 Co-Axial Helicopter flies stably and silently indoor and outdoor, just as walking in the air. It makes you and your family to have lots of fun with it together. With double-sharing-one-axis structure and with stable and silent flight, it is designed for beginners with no experience , It is easy to learn to fly. You can be familiar with its operation and enjoy the flying in a short-term. With power supply of Li-polymer battery, it can fly lighter and longer. Complete set, Ready To Fly. Only requires 8 AA Batteries for Transmitter. Best choice for beginners, children of 14 and over. It is an entry-level helicopter that can be also suitable for experienced flyers to fly indoor. Becoming fluent in flying it, you can try to fly Walkera Dragonfly04#1 or Esky Honey Bee2.
(via Esky, LAMA V3, 4CH, Co-Axial, Electric, RC Helicopter, RTF @ Hobby-Estore.com $79.9)

Esky E014 Belt-CP Electric RC Helicopetr RTF

Everything looks great, the linkages are smooth, there are even ball links on the servo side of the linkages...Nice touch. The landing gear comes with the little rubber "feet"are already in place on the struts, another nice touch that ESky added.
(via Esky, E014, Belt-CP, Electric, RC Helicopetr, RTF @ Hobby-Estore.com $189.6)

Esky E005 Honey Bee Upgrade 3D CP2 CCPM 6CH RC Helicopter RTF

Complete and ready-to-fly the kit includes everything except 8 AA batteries for the transmitter. Upgraded motor and symmetrical wooden blades are pre-installed at the factory for full 3D performance right out-of-the box. Now comes with new style balanced Li-po charger. This model is suitable for r/c helicopter intermediate pilot, 3D aerobatic action and inverted flight is possible! Stunt flyer!
(via Esky, E005, Honey Bee, Upgrade, 3D, CP2, CCPM, 6CH, RC Helicopter, RTF @ Hobby-Estore.com $114.3)

Esky Honey Bee King II 6CH CCPM Electric RC Helicopter RTF

Honey Bee King 2. The Esky evolution of the Outstanding Esky King RC helicopter. Now fitted with belt driven tail rotor system and an all new lower mainframe design which includes upgraded skid/struts and battery holder.

The King 2 retains the tried and tested components that made the original so reliable and rewarding to fly. In addition to the new structural improvements and belt drive, ESky have modified the tail setup to give even more responsive control.

This is probably the best ready-to-fly helicopter you can buy... and this is definitely the place to buy it!
(via Esky, Honey Bee King II, 6CH, CCPM, Electric, RC Helicopter, RTF @ Hobby-Estore.com $149.8)